Saturday, January 22, 2011

C110 engine stripdown

When I bought my C110, I had a choice of two engines I could get with it for spares, from what you will see next, I think I picked the right one.

I started taking apart the spare engine today, The plan was to give it a bigger piston, some tuning work and getting it nice and clean in the blasting cabinet and repainting the cast steel parts.

When I took of the head cover, the rockers looked a little funny to me, but I thought that might just be 1960's production.
when the valvecovers were taken off you could clearly see that someone had lightened the rockers, and had even ground down the adjuster screw and bolt on the inlet side.

And when I took of the head, I was surprised by a high domed piston:

This looked very high to me, I couldn't wait to compare them to the pistons I had back home.

By now it was clear that this wasn't a standard engine, someone had done some tuning, but for what purpose?.....
The kickstart hole was blocked off with a piece of cork or rubber, so I assumed the shaft was snapped, as this happens a lot to C110 engines.

But when I opened the engine up, there was no kickstart shaft...
This engine was used for racing!!!


My C110 came from the north of holland, where they used to do grasstrack racing, could this have been used in a 50cc class, as the high domed piston and lack of headgasket would indicate a very high compression.
Also, the oil residue was very thick and my dad recognised the smell as old racing oil.
Did this engine run on methanol?

I took the piston home.
At home I had two pistons, that I thought were C110 and CY110, but now I don't know anymore.
From left to right C110,CY110,super racing piston????
or C100,C110,CY110???
If you know, please tell me.
All pistons are 40mm and marked "ART" ,as you can see, they gradually get higher.


Monday, January 17, 2011

rear brake

I finally decided how to attach the rear brake cable.
As the footpegs are made for a brakecable and the original S90 brakeplate is meant for a brakerod, there was a problem.
I didn't want to weld anything to the brakeplate, but I couldn't decide on what it should be, untill last weekend, when I made this bracket.
I know similar brackets exist from aftermarket suppliers, and yamaha used something like this on their 125 production racer back in the days.



It is bolted with the brakestay and has a lip that falls against the edge of the brakeplate, very simple but effective.

Wednesday, January 5, 2011

CR110 replica forks

I recieved 2 sets of CR110 front-fork-spring-support-rings (anyone for scrabble?) that I bought on ebay. One set will be for the RSC90 but the other is for an actually abandonned project. A Honda CR110 replica.
It was the plan to build frames and really change mine and my dad's CB50 racers into CR110 replicas, but the 50cc class has become too fast with modern 2stroke tuning, so I am abandonning the class altogether and also the CR110 project.
All the parts I allready had will be used on other bikes probably, or maybe sold.
The front forks were allready made for this project, it only needed these rings, so when I got the chance, I bought them.
It supports the spring where it rests against the lower yoke.

I think this fork will go into my SS50 motorcycle, combined with a front fender like the one made for the RSC90 and the same type of 160mm front drum laced to a WM00(1.20) alloy rim.

Will need to make some clip-ons to mount the original CR110 levers onto....

RSC front fender, part 4

Last weekend I went on with the front fender for the S90 racer, I didn't really feel like it, but in the end I was glad I did the work.


mounted on the bike:


The weight really surprised me, and it still functions as a stabiliser because of the supports underneath the fender, just like original.

On to the next long project that has been on a rest for a while, the model for the gastank....

Tuesday, January 4, 2011

brakepedal

My brakepedal was still smooth on top and I wanted it to have teeth on the flat surface, like a C(Y)B72 pedal. I never made something like this before, but I think it turned out pretty nice. Milled with a 20degree cutter, set at an angle.
In hindsight I should have made bigger teeth, but I can do that when this has worn away from use.

Monday, January 3, 2011

12 Volts

The oudshoorn gets some real electrics, no fuss with a vulnerable old 6volt system, but 12 Volts out of a /6 Beemer.

And it still fits under the original front cover.

a little history

I found this picture on the web, on this Belgian blog This is the Oudshoorn BMW a long time ago.
Before I was born? as I don't remember it like this, never seen black valvecovers or those dellorto carbs.



The caravan in the background I do remember, sadly the wood rotted away, but we still have the chassis which is now a trailer for my dad's sidecar.

Tuesday, December 28, 2010

RSC front fender, part 3

Some more progress on the front fender, I didn't feel like it for a long time, so I did a lot of other small stuff but now it is really comming together.

I pressfitted the rods to the fender stays using 2 pieces of steel with half of a round hole cut out of both of them. The rod is now stuck in the stay and will be hold in place by some glue* when all is done.
(special glue also used for putting lining onto brakeshoes)
I bent the stays so they meet up with the fender, that is how it now holds the fender over the tire.

A view of the bike with the fender, for the bigger picture, I like it.

Next step will be to make some reinforcements to go under the fender and riveting it all together. I allready made a mold for the rivet heads by pressing a ballbearing into a piece of aluminium.

pedals part deux

part three is still to come, my pedals aren't finished yet, but they are mounted and functional, when I have a rear brake cable made.

brake pedal still needs some "teeth" so I won't slip off.


Shift lever and linkage, with a hole drilled thru the pedal, like some original RSC/RC/CR levers had.

Connecting rod had to be bent to match up to the engine, so only threaded at one side for adjusting.

some more progress on the Oudshoorn

My dad did a lot more small jobs on his BMW and I helped a little.
I had some tickle style headlamp brackets at home, that were supporting a CB72 headlight on my desk (my kind of paperweight) I fitted them to the ceriani/van bockel forks with an original BMW headlight my dad still had. It has clearly been on a caferacer before, as there are some extra holes and switches and there was only a tacho mounted, no speedo.

Also mounted the levers, they are reproductions of the old tommaselli levers, they fit well with the original tommaselli throttle that I allready found in the bottom of a drawer.

And for when it will not be ridden with a sidecar, a kickstand is fitted. Not the original as the bracket on the frame was ground down, this was made using Honda C50 kickstands and the end is off a Honda brakepedal. Mounted to a 10mm steel plate which sits between the frame and engine instead of original bushings.