Wednesday, May 18, 2011

been busy

Late update, as I've been busy with too many bikes and things simultaneously, allmost causing my head to explode at some point, from an overload of information.

The RSC90 had its first event....and a lot of bugs showed themselves needing to be sorted out.
The front forks were too stiff, causing the numberplatebracket to bend en hit the front fender.
The rev counter wouldn't go past 5.000RPM because of vibrations.
Carb settings were way off..
or maybe not, as the camshaft is wrong.

The bike felt really!! strong upto about 5.000RPM but after that, there was almost nothing.
So I borrowed some camshafts from Ralph and my dad started measuring.

After that, a load of graphs to compare, and lucky for me, my dad can read these like a book.

including the original S90 camshaft, we now have data on four different profiles, one cam looks nice for racing use, now I hope Ralph let's me use it......
One of my camshafts would be okay for the 122cc engine I plan on building, if it is possible to rotate the camshaft about 10 degrees, creating different timing.

I plan on riding next sunday with a standard S90 camshaft, maybe I can then get the carb figured out. And test the modifications to the front forks, rev-counter stay and so on.

For those of you who like pictures, this is the RSC in action.
click on the picture to see the album of the photographer.

Wednesday, May 4, 2011

first event of this season

last weekend was the first event of this season, I didn't take the RSC90 though, this track was quite long and I want to give the S90 a good chance to have a smooth run in next weekend at Oldenzaal.
In Wolvega I rode the CB72 that I had some experience with last season and one of my dad's BMW's. This was the first time on a 500 BMW for me.
It took a bit of getting used too, especially the speed as I reached over 200km/h on the straight after which I had to brake hard for a 2nd gear corner. But I had fun with it.

picture thanx to Lea, CRT club photographer

No. 64 is me on the CB72, chasing a maico that I passed later on.

Again, picture thanx to Lea.

But I think this picture was taken just 3 corners before the CB72 tried to kill me....
The oil seal in the outgoing gearbox shaft worked itself loose, spraying oil over the right side of the bike, causing me to fall in the only right corner on the track.
Luckaly I could stand up without problems and pick up the bike. Only some bruises to my leg and back.
My ego was okay as this was clearly the bikes fault.

And this is what the CB72 looks like now, taken appart to straighten the front forks, new seal installed on the output shaft, footpeg straightened, but still some more work to be done before I can ride it again next weekend at Oldenzaal.

Friday, April 15, 2011

C110

My C110 also had some work done to it, and I even rode it to work for a few days.
The original front brake arm had a lot of play in it because of worn rubbers, so I temporarily replaced it with some balljoints and a piece of 8mm threaded bar, this really improved breaking because there is no more distortion in the system.
Now I want to look at replacing the bushings on the original brake arm with bearings, then I will have the same effect, but with original looks.


And I openend up the rebuilt C110 motor again to fit it with a kickstart shaft I found on ebay, it is now ready to be fitted.
Note the breatherbox, the lid is homemade, with thanks to Ralph for lending me his original unit.

newest pics

The new "screw-ons" (imitation clip-ons) have been on my moped for a while, but I didn't take good pictures yet, so here they are.




Now only to decide what colour I want to have this bike painted, I'm thinking of Honda scarlet red, but suggestions are welcome.

ready for testruns

The RSC90 is ready for testruns now, the tank is borrowed from one of my dad's CB72 racers, but it is fully mounted. I had looked at using a std. tank that I borrowed from Ralph but it turned out to be easier to use this tank instead, because I allready removed the original brackets from my frame.
So Ralph is getting back his tank afterall.


I plan on riding at Oldenzaal the 8th of May, a nice long track with many twists and turns.
I will look into mounting the fairing before then, but I might just run with a small oval on the front for my numbers.

Wednesday, April 6, 2011

line-up

The weather was nice, all the bikes were at the workshop and I had a camera with me...just felt like a "kodak moment"

all my honda's lined up, and in the background you can spot the Beemer.

Monday, April 4, 2011

long time no blog

It isn't like nothing has happened, but I've been busy at work and didn't really feel like doing much at the computer.
The S90 had some more testsessions, swapping exhausts with different bikes.
Conclusion: the camshaft has a timing for an open megaphone.
So the cam was swapped for another, still a hotcam compared to a standard S90 cam, but not the wildest one.

After the cam was swapped, we did another test, it started easier, and responded pretty well to the throttle, with the intended exhaust with muffler.
Also much quieter, what means power to the rear wheel instead of making noise.

Sunday, March 13, 2011

first turnover

Today, the S90 had its first turnover, with thanks to the gastank lent to me by Ralph.
It was strapped at the back, with an SS50 tankmount rubber, but atleast it fitted at the front, as the frame is wider then the SS50 tanks I have.

Of course it didn't start right away, I didn't have spark.
After checking just about everything, it turned out to be dirt and/or conservation between the points that needed some sandpaper instead of the normal filing with a nail file.
After that was done, It started reluctantly, telling me that it wants some work done to the carb to get it running properly. But it sounds potent, a little too potent for a sunday afternoon in a rural area, so we took it back inside again to continue with jetting another day, after I took some pictures.

Next to my moped it is just a small bike.

tough choice

Yesterday (saturday) I had to work until 2, but after that I felt like taking a ride on the BMW. but when I came back to the workshop to change back to another bike to take home, I had a difficult decision to make... which one should I take home:

I decided on the SS50 (middle) and It will bring me to the workshop again today, so I will have the same "problem" today.

Saturday, March 5, 2011

swapmeat today

Today, my dad and I went to a swapmeat called "vehikel" and found some nice parts, mostly small things, like a couple of bolts I needed for one of my SS50's, a BMW R50 headlight holder and a length of rubber profile for the Oudshoorn BMW seat.
At one of the BMW stands, I found a footrest in a bin, one of maybe only 20 made for the Oudshoorn BMW's, my dad only had one with his bike, but what are the odds of finding a second one?
He probably won't use it as they are very low, but it is just nice to have the complete set.


And I bought a set of tyres for the C110. Front tyre mounted on a rim just to see what it would look like, as it is a cheap rimprotector until the bridgestone 2.00X18 is back in stock.
Yes I will change the wheelsize to 18" with 1.2 shouldered alloy rims and skinny tyres, not original, but looks damn good, I've seen it on a japanese bike.